|
VPI Conductile / VPI Stat Mate Anti Static Tiles for
Static Control
Experience
the VPI Difference!
More Options in ESD
Tiles for Static Control
Extensive Options in Colors!
|
ESD Tile
Install Site Simi Valley, CA |
VPI Conductile and Statmate ESD Tiles
are designed specifically for
THE most demanding of manufacturing environments; clean rooms, labs,
hard drive manufacturing, DOD and Munitions. Any
application requiring exceptional wear characteristics in concert with
the
highest surface finish and most consistent electrical properties of ANY ESD tile on the market!
NEW! DISCOUNTS TO
QUALIFIED FLOORING CONTRACTORS! CALL FOR DETAILS |
-
Truly
American Made from start to finish!!
-
Highest
forgiveness of concrete vapor!
-
Won't flake,
break, delaminate or degrade!
-
Superior
gloss and micro finishing!
-
Extremely
SQUARE, seamless appearance!
-
Clean
room compliant and DOP free.
-
Lowest
outgassing of ANY ESD flooring
-
Huge
Color Selection
-
Outstanding
wear warranty, lifetime conductivity,
easy to use one part conductive adhesive.
SHINE,
VERSATILITY, PERFORMANCE - SYNONYMOUS WITH VPI
VPI Conductile
(<1.0E06) and Statmate (static dissipative) esd floor tile: feature an extremely advanced vinyl
rendered permanently
conductive via micro encapsulated conductive elements in concert with an
extremely low maintenance high micro finish top surface. VPI
THE utmost in electrical performance, aesthetics AND
resiliency . VPI's micro ground edges provide a near seamless appearance AND unlike "typical" imports, ESD Tiles that are
loaded with reconstituted, cheap
limestone based recycled clay fillers, VPI esd vinyl tiles
have one of the highest static load limits in the industry! VPI's
encapsulated conductive elements (distributed evenly throughout the
tiles) provide exceptional electrical consistency
and thorough-tile-to-ground charge decay.
Available in multiple designer colors offering the
flexibility
to meet your design criteria while providing outstanding
protection and conformance to THE most stringent of specifications
including ANSI ESD 20.20-2007! VPI esd tile isn't dependent on
external anti-stats, ESD
floor finish or ambient humidity to maintain it's exceptional conductivity
AND it won't flake and crumble like other esd tiles*. VPI esd tile features a
lifetime
warranty on electrical conductivity and are made in the good ol USA!
Our unique
conductive Permanent Bond fiber loaded
adhesive is furnished at no charge:
This easy to use
adhesive features the ultimate in
electrically consistent conductivity with excellent bond strength. Cleans
easily with soap and water. No more time consuming mixing (as is required with
those nasty epoxy based adhesives, no more problem causing variables and
no more staining problems either)!
For
Releasable installations without the Permanent Bond:
Our new
US2004R Releasable Adhesive.
makes replacement or removal of the tiles a snap. This adhesive
maintains permanent tack, is conductive, water based, low voc and works
GREAT for raised panel access!
ELECTRICAL SPECIFICATIONS
Electrical
Resistance to Ground: Per
EOS/ESD S7.1
Static
Decay: Federal Test Method 101C, method 4046TW101B at
15% relative humidity:
Static
Propensity: AATCC-134,Conditions: 68 deg, RH @
40%, Underlayment, earth grounded metal plate, Soles Neolite XS 664 with
static dissipative polyurethane heel grounders:
Composition: Pure solid vinyl, devoid of the usual fillers that make
standard esd tile break and crack!
ASTM
F 1700, Passes
Underwriters
Laboratories: Meets UL Standards
NFPA
Life Safety Coded 101, Class 1 Int. Floor
Critical Radiant Flux (ASTM E 648) .1.08 W / cm2
Smoke
Density: (ASTM E 662) <450
Flame Spread (ASTM E 48) ,75
Slip
Resistance: Meets or exceeds Federal standards and ADA
recommendations of .6 for flat surfaces.
Dimensional
Stability: Exceeds Federal Specification SS-T-312B, Type III,
Vinyl Tile.
Flexibility:
Exceeds Federal Specification SS-T-312B, Type III, Vinyl Tile
Standard
Availability, 3.0 mm all sizes and colors): 12"
x 12", 24" x 24", 36" x 36"
Static Load Limit
> 2,500 PSI
Note for fast track construction: New
slabs cure very slowly and will generally require a minimum of at least 90
days (4" slab over vapor barrier). Many slabs (depending on
environmental conditions and water of convenience used in mixture) will take
MUCH longer to cure to the recommended < 5 lbs moisture emission level
required prior to installation of your new ESD flooring. The curing
times of the slab can be greatly hastened via the addition of the new "super
plasticizers to concrete mixture. These plasticizers don't change
slump etc yet typically provide a 50% increase in curing time allowing
installation or your ESD flooring in as little as 45 days.
For the latest recommendations on grounding
esd flooring for static control please visit our NEW page located at:
New grounding recommendations for esd
flooring
CONTACT United STATIC
CONTROL PRODUCTS
| 
