|
ELECTRAMAT
MSDS SHEET SELECT AN ESD FLOOR MAT OR ESD TABLE TOP MAT
Your esd mats work HARD for a living and deserve the best!
ElectraMat ESD matting cleaner contains powerful static dissipative surfactants that thoroughly clean without leaving insulative residues. ElectraMat restores conductivity, deep cleans and is available in a convenient 1 quart bottle with trigger sprayer. For light duty cleaning of your esd mats just wipe the surface with a cloth or paper towel dampened with ElectraMat. For heavier duty cleaning simply mist the esd mat with ElectraMat and wipe off the dirt and grime with (preferably) a lint free cloth or even a paper towel. ElectraMat works great for damp moping esd floor mats too. Just pour full strength into a mop bucket, immerse a clean cotton mop into the solution, ring out excess and damp mop.
Electra-Mat Cleaner MSDS _______________________________________________________________________________ SECTION I - IDENTITY _______________________________________________________________________________ ESD Mat Cleaner Hazardous - NO United ESD.com Inc ------------------------------------ 4878 Lakeview Colorado City, CO 81019
Health 1 Flammability 1 Reactivity 0 Personal Protection B
Telephone Number for Information ------------------------------------ 719 676 3928 4 = Most Hazardous Date Prepared Emergency Phone Number 04/30/06 719 676 3928 or Poison Center Prepared By S Cooper _______________________________________________________________________________ SECTION II - HAZARDOUS INGREDIENTS _______________________________________________________________________________ Hazardous Components PEL TWA STEL Other Limits % CAS Reg# ppm ppm ppm (opt)
NOT A HAZARDOUS MATERIAL AS PER 29CFR 1910, 1200 AND M.G.L. c. 111 F _______________________________________________________________________________ SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS _______________________________________________________________________________ Boiling point - 209F Specific Gravity (Water=1) - 0.95 Vapor Pressure (mm Hg) - 18 Melting Point - N.A. Vapor Density (air=1) - .98 Evaporation Rate(Butyl Acetate=1) - .35 Viscosity (CPS) - 5.0 Decomposition Temperature -NA. Auto Ignition Temp. - NA. Solubility in Water -COMPLETE pH - 7.0 +/-.5 Appearance and Odor -Light Blue Liquid _______________________________________________________________________________ SECTION IV - FIRE AND EXPLOSION HAZARD DATA _______________________________________________________________________________ Flash Point - N.A. Flammable Limits LEL - N.A. UEL - N.A. Extinguishing media - N.A.
Fire Fighting Procedure - N.A.
Fire and Explosion Hazards - NONE _______________________________________________________________________________ SECTION V - REACTIVITY DATA _______________________________________________________________________________ Stability - STABLE Conditions to Avoid - N.A.
Incompatibility - ACIDS Hazardous Decomposition or Byproduct - N.A.
Hazardous Polymerization - WILL NOT OCCUR Conditions to Avoid - N.A. _______________________________________________________________________________ SECTION VI - HEALTH HAZARD DATA _______________________________________________________________________________ Routes of entry: Inhalation - NO Skin - NO Ingestion - YES Health Hazards-Acute: CAUSES EYE AND SKIN IRRITATION CHRONIC: REDNESS OF SKIN
Carcinogenicity: NO NTP - N.A. IARC Monographs - N.A. OSHA Regulated - NO Signs and Symptoms of Exposure - ITCHING, BURNING SENSATION REDNESS
Medical Conditions Aggravated - SENSITIZED SKIN
Emergency and First Aid Procedures - WASH CONTACT AREAS WITH WATER FOR 15 MINUTES. INGESTION: GIVE MILK, WATER OR CITRUS JUICE, INDUCE VOMITING WITH OIL OF IPECAC. MOVE SUBJECT TO FRESH AIR _______________________________________________________________________________ SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE_______________________________________________________________________________ Steps to be Taken in Case Material is Released or Spilled - DIKE AND COLLECT MATERIAL INTO PLASTIC CONTAINER. WATER RINSE AND DRAIN, FLUSH SMALL AMOUNTS. (BIODEGRADABLE) Waste Disposal Method - USE SANITARY LANDFILL DISPOSAL. (NOT A HAZARDOUS WASTE) FOLLOW STATE AND LOCAL REGULATIONS (RCRA; SUBTITLE D) Precautions to be Taken in Handling and Storage - DO NOT MIX WITH OTHER CHEMICALS. AVOID PROLONGED CONTACT. KEEP FROM FREEZING. Other Precautions - STORE IN SECURE AREA. AVOID FOOD CONTAMINATION. AVOID PROLONGED INHALATION OF VAPORS. KEEP OUT OF REACH OF CHILDREN ! _______________________________________________________________________________ SECTION VIII - CONTROL MEASURES _______________________________________________________________________________ Respiratory Protection - NOT REQUIRED WITH NORMAL USE Ventilation Local Exhaust - N.A. Mechanical - N.A. Special - N.A. Other - ASSURE FRESH AIR CIRCULATION. Protective Gloves - REQUIRED: RUBBER, PLASTIC Eye Protection - RECOMMENDED: SAFETY GLASSES Other Protection - APRON RECOMMENDED EYE WASH FACILITY Work/Hygienic Practices - DO NOT EAT, DRINK NEXT TO MATERIAL. WASH HANDS AFTER WORK. _______________________________________________________________________________ SECTION IX - TRANSPORTATION 49 CFR____________________________________ Unit Cont. - 55,30,5,1 GAL.,1 QT. PLASTIC Report Qty. (Lbs) - NA. OSHA - NOT REGULATED. Labels - NO. DOT - NOT REGULATED. UN - NOT REGULATED. Vendor assumes no responsiblity for injury to vendee or third person proxim- ately caused if reasonable safety procedures are not adhered to as stipulated in the data sheet. Additionally, vendor assumes no responsibility for injury to vendee or third persons proximately caused by abnormal use of the material even if reasonable safety procedures are followed. Further more, vendee assumes the risk in use of the material.
The information herein is based on data considered accurate. However, no warranty is expressed or implied regarding the accuracy of these data or results to be obtained from use thereof. Essentially similar to OSHA form # 174
United ESD: 719 676 3928
|