|
ULTRASTATIC MISSION CRITICAL
ESD CHAIR MATS FOR COVERING HARD SURFACES
The
portable ESD Floor for your workstation
Click Here for ESD Chair Mats Used for Covering Carpeted
Surfaces!
NEW:
Click here to buy the following material on
line and SAVE!
 For use over
concrete and hard surface flooring
Perfect
for use as a permanent or temporary esd safe
workstation mat!
Fully
compliant to NEW ANSI ESD S20.20 standards!
Passes
ISO and all ESD Audits with ease!
TR53 friendly!
ESD Conductive! Results you can count on!
Free
shipping on orders over $100 (continental USA,
carrier of our choice)!
Lifetime
Warranty on conductivity and Wear!
 Chair casters often act as tiny
ball mills grinding dirt, wire clippings even nuts and bolts deep into
your hard surface flooring and even bare concrete. Results: Unsightly scratches, gouges
and DIRT. The problem is compounded in electronic assembly by the need
for advanced electrostatic control. Not only must the mat protect the
flooring, it must provide unparalleled electrical conductivity in order
to dissipate the electrostatic potential generated by the contact and
separation of the chair casters rolling on the matting or the technician
walking on the mat.
Prior to the new standards antistatic
floor mats merely had to provide an electrical resistance to ground
slightly below 1.0E09. But with today's new requirements the
esd flooring (or matting) surface must fall in the conductive
range of <1.0E06 to provide the recommended
resistance between the operator / heel grounders and
floor matting surface of <3.5E07. Why the
changes? Many sophisticated components are simply too susceptible
to damage from even low voltage electrostatic potential.
TYPICAL ANTISTATIC CHAIR MATS
FAIL ANSI ESD
S20.20-2007!
Many ordinary anti-static mats rely on the ambient humidity
in the
environment to render the mats even
slightly conductive. When
the humidity is high (>60% rH) they
sometimes meet the old specifications
for electrical conductivity (coming in
slightly below 1.0E09) BUT when the
humidity drops they become insulative! A
mat's electrical conductivity to ground
tells the tale. Does this normal
antistatic mat
really work? Not really. A piece of
dry wood comes in about as conductive as
this popular mat AND it's not even
close to being conductive enough to
comply with the latest requirements of
ANSI ESD S 20.20 for conductive flooring
or 97.1 technician / heel straps /
flooring requirements.
Our UltraStatic Control Chair mats are
custom manufactured here in Colorado
using our Titanium static conductive
(not mere anti static) esd flooring
sheet vinyl. This material features an
unbelievably hard wear resistant top
surface laminated to a full surface
conductive backing and provides ULTIMATE
permanent static conductivity in all
environments and at all humidity levels.
Your custom cut esd floor mat comes
complete with industry approved ground
cord and full electrical certification
using the latest test methods! United's
Mission Critical ESD Floor Mats Tame the
Static Beast BEFORE it Takes Another
Byte!
AVAILABLE COLORS
|
Pale Gray
PN: Ti481 |
Dark Gray
PN: Ti482 |
Electronic Blue
PN: Ti483 |
Clean White
PN: Ti480 |
SPECIFICATIONS
|
Surface Resistivity Point to
Point (PTP per EOS ESD S 7.1) |
>1.0E04 <1.0E06 (esd conductive) |
|
Electrical Resistance to Ground
(RTG per EOS ESD S 7.1) |
>1.0E04 <1.0E06 (esd conductive) |
|
Flooring Radiant Panel ASTM
E648; NBSIR 75-950: NFPA 254, Critical Radiant
Flux |
0.73 W/cm2, Class 1 |
|
Smoke Density, ASTM E-662; NFPA
258; Average optical density in burning /
smoldering mode |
<450 |
|
Residual Indentation LF-475A |
0.002 average |
|
Abrasive Wear, Taber H-18 wheel,
5,000 cycles, 1,000 gm weight |
1.1% loss of weight |
|
Abrasive Wear, Taber H-18 wheel,
1,000 gm weight to wear layer penetration (end
point) |
>20,000 cycles, (2.0% loss of weight |
|
Static coefficient of friction,
ASTM D-2047-03, James Test average wet, dry
leather |
.60 approx. |
|
Static load limit DIN 16961.2 |
>1,000
P.S.I. |
|
Charge decay time per FTMS
4046-101c |
much less than .17 seconds |
PRICING
NEW:
Click Here to Buy this esd
mat on
line and SAVE!
| 3' x 3' |
$107.10 |
| 3' x 4' |
$142.80 |
| 3' x 5' |
$178.50 |
| 3' x 6' |
$214.20 |
| 4' x 4' |
$142.80 |
| 4' x 5' |
$238.00 |
| 4' x 6' |
$285.60 |
| 4' x 7' |
$333.20 |
FREE SHIPPING on this material
for orders over $100.00! (continental USA,
carrier of our choice,
see free shipping details).
PART NUMBER: 40220 HS-B followed by size and
color.
CONTACT United STATIC CONTROL
PRODUCTS
Pone: 719 676 3928
Fax: 719 676 3929
Major Credit
Cards Accepted
ESD
Flooring,
Mats, Chemicals,
ESD Ionizers, and
Expertise
United SCP Tames the Static Beast BEFORE it Takes Another Byte
This page last updated on
08/17/2010
|
