Floor Finish to reduce dust, static, maintenance,

UltraShine

The
Don't Zap Your Computer!
Stops Here

Breathtaking Gloss! Controls nuisance static buildup, reduces dust, outstanding longevity

 Perfect for Retail, Hospitals, Supermarkets and More!

 

Your  Floor, a major component showing the pride your Company places on cleanliness, aesthetics and value.  THE final touch in making your environment into a shopper friendly showplace for your Customers? NO!  User induced static discharges  can constantly ZAP the pleasure from the shopping experience while scuff marks, dirt  and static induced dust build-up can dull "standard" floor finishes AND Inventory reducing it's value and becoming a cumbersome maintenance nightmare.   Now there is UltraShine, unique, highly wear resistant, and static control floor specially formulated to STOP those nagging ZAP's,  while providing the high luster and low maintenance  expected from a professional grade floor finish  No need for "special" application procedures, UltraShine's superior metal cross linked, urethane enhanced polymers will impress the most discriminating floor care professionals.

 

Expect the best at a competitive price (about the same as non-static control finish)!

UltraShine's excellent leveling and low sudsing properties allow for easy application (even when applied in thin coats) and will dry quickly to a beautiful mirror gloss.  UltraShine's extended durability and resistance to powdering  reduces the necessity for costly

 stripping, accepting recoats while providing excellent gloss with no reduction to it's exceptional static control properties. 

 

How does it work? 

UltraShine works by increasing the conductivity of your floor allowing accumulated static charges to spread across the floor (rather than build up on the floor and your clients) and dissipate harmlessly via the metal columns and devices located throughout  your facility.  Working in conjunction with a tough metal cross linked urethane enhanced polymer.

UltraShine stops static in it's tracks while resisting the floors ability to attract dust.

  • NO "special" application procedures! 

  • Eliminates static discharges

  • Reduces dust and the need to continually dust mop

  • Exceptional wear resistance

  • Non yellowing

  • Extremely easy application

  • Competitively priced 

 

APPLICATION & MAINTENANCE

Best results are obtained when the finish is applied to surfaces that are 60o F or warmer. Remove old finish or wax with a high quality finish stripper. Mop up or vacuum the stripping solution and rinse the floor thoroughly with clean water. Optimum appearance and gloss is obtained with five coats of finish. Apply thin even coats, allowing the finish to dry for approximately 30-45 minutes, depending on humidity and temperature, between coats.  

Recoating existing finish: Wash the floor with a neutral cleaner and allow it to dry. Apply thin even coats, allowing the finish to dry for approximately 30-45 minutes.

Routine maintenance program: Floor surfaces should be swept with a clean daily to remove abrasive loose dirt and sand. Damp mop floors with neutral cleaner daily to remove soil, salt, and film deposits that can degrade a coating's gloss. Floors may be high speed burnished to restore the gloss and extend the time between

 

SPECIFICATIONS

Nonvolatile Solids                  19 + 0.6%

Total Active                          25%

pH                                      8.2 - 9.0

Gloss 600                            89 @ 5 coats

Color                                   Translucent White

Weight Per Gallon                   8.55

Slip Resistance (ASTM)           0.5 min.

Stability            1 year min. at room temperature

Freeze/Thaw Stability              3 cycles

Drying Time                            30-45 min.

Water Resistance                    Excellent

Gallon Coverage (Feet2)          2000 + 10%

Durability (ASTM D-968) 3,680 grams

This material is not a hazardous mixture as defined in 29 CFR 1919, 1200 and M.G.L. c. 111F.  Safety glasses and gloves should be worn during application and handling.  If ingested, drink milk, water, or fruit juice and induce vomiting with oil of ipecac.  In the event of eye contact, flush area with water for 15 minutes. Consult with a physician. For detailed information, consult MSDS sheet.

 

 

 

 

 

United ESD.com INC

 

P.O.B. 19252, 4878 Lake View Cir

Colorado City, CO 81019

United States of America


Email Sales or Technical Support 

Direct: 719.676.3928         Fax: 719.676.3929

 

This site is protected by copyright and trademark laws under US and International law.

Reserved. © 1993-2005 via SC Productions

United ESD.com INC

Static Control on a Higher Level!

02/16/2007