|
FG-7040
3 Layer Dual Side Non-Marking ESD Heel Straps
Static Control
Solution's ESD heel straps are specially designed to
provide a continuous ground path between the user and a properly
grounded ESD floor. Our
ESD heel straps are designed to drain the static charge of a user
that is built up during normal activity. They offer instant
static dissipation for rapid protection. Job functions which
require worker mobility should use heel grounders. Failure to
wear a heel straps can cause potential damage to the equipment
which the user operates and the components they contact.
FG-7040
3 Layer Dual Side Non-Marking ESD Heel Straps
MSRP:
$7.65
- PREMIER PLUS Heel Grounder
- BEST heel grounder on the market, will outlast and
outperform competition
- Elastic hook and loop, 3 layer, both sides non blacking
industrial tire grade rubber.
- Longest Lasting: High tire grade rubber / 4 wear
surfaces
- Most Durable: Will not tear
- Will not mark shoes or floor
- Comfortable and Snug Fitting: Large 1½” width
- Easy to install and adjust
- Resistance designed Into the material
- Conforms to EOS/ESD 20.20 Standards
Specifications:
Heel Cup: .060"
(1.5mm) thick 1-3/8" wide dual elastomer with non-smudging
interior and black (non smudging where noted) exterior.
Heel Cup Resistivity:
103-105 Ohms/sq.
Resistor: One megohm value ¼ watt (+/-10%) carbon film resistor
Tab: Blue (or
customized) 3/8" wide fray resistant polyester tab with
conductive carbon suffused fibers.
Tab to Cup
Resistance: 1x106 ohms - 1x107
All Ohm-Stat foot grounders can be adjusted to fit the user.
The Ohm-Stat Heel Grounder line has four unique styles to fit a
wide variety of men's and women's shoes, boots, safety shoes,
loafers, tennis shoes, and running shoes. They are easy cleaned
with mild detergent and water. To assure that a continuous path
to ground is maintained, the user should wear the ESD footwear
on both feet. A heel grounder should be used on a floor surface
with a resistivity of less than 1010 Ohms/sq.
Heel
Grounders can be custom ordered with the following:
- Larger cup sizes to fit "cross trainer" style shoes and
work boots
- Longer length tabbing for boot styles (cowboy, etc.)
- Customized colors
- Private label and design
|
